GOODSOUND!GoodSound! "Ask Me" Archives

...to November 30, 2003

 

Minisystem

November 30, 2003

I am looking for a minisystem. The main criteria is the best sound for the price. I don't care a lot about extras or a large CD capacity. I am looking to pay $300 to $600. Can you give me some recommendations?

Micki Owens

The Sharp digital systems have come down in price drastically as of late. We reviewed the Sharp SD-NX10 back when the list price was $1499. Now you can get the same system for around $400 through various Internet shopping sites. You may even have enough money left over to upgrade the speakers to a pair of Axioms or Ascend Acoustics. I can't think of a better deal going today than that.


Hsu Research?

November 28, 2003

You mentioned sometime back that you would be reviewing a Hsu Research subwoofer, but I've yet to see the review. Did I miss it, or if not, is it still coming? Thanks for the excellent website.

Ronald Montgomery

The Hsu Research VTF-3 review is scheduled to be published on December 15th. Almost there!


Speaker-cable question and amp malfunction

November 25, 2003

A few months ago, I purchased a terminated (spades) pair of single biwire speaker cables to use with my old Wharfedale speakers, but I later upgraded to Piegas that could not be biwired. Can I still use the cables, and would it make any difference in performance if I just connected two cable ends to each speaker terminal?

Also, I have a Cairn 4808A integrated amplifier whose left channel does not seem to be producing upper high frequencies adequately (compared to the right channel and another amplifier I tested). I tried switching speakers (with cables) and sources but with no success. The amplifier is only seven months old. Could it be something simple -- static or cables -- that would not require professional repair?

Viktor

You can connect both leads in a biwire set of cables to a single set of inputs as long as your speakers' binding posts are sufficiently large enough to do so. You'll need to make sure you securely tighten the spades such that they don't come undone and short-circuit your amplifier. There should not be any performance degradation assuming a solid connection.

Regarding your amplifier, my first guess would be that you have a speaker problem, but since you said you checked that, I'd seek service for your amplifier. I just can't think of any other reason for the problem you describe.


Two subwoofer outs?

November 21, 2003

What is the purpose of two subwoofer connections on a A/V receiver? The Yamaha RXV-3300 has this function.

Leon Gucwa

With the ever increasing number of speakers consumers are willing to house in the name of good home theater, one reason for this additional connectivity is simply to add a second subwoofer. In some instances, however, with "powered towers," the LFE channel is reproduced by the subwoofer section contained in the left and right speakers. Companies such as Canton and Definitive Technology make such models. Many of these speakers have LFE inputs for this express purpose. This can be advantageous in difficult rooms because running two subwoofers seems to smooth the bass response. And obviously it can increase overall headroom compared with one subwoofer.


GOODSOUND!All Contents Copyright © 2003
Schneider Publishing Inc., All Rights Reserved.
Any reproduction of content on
this site without permission is strictly forbidden.